P3HUB is divided into two types, P3HUB1 and P3HUB2, the former using AVR chip, the latter using PIC chip. Difference between two different ways of flash files, Both of them are equipped with upgrade button, offered the official website of the firmware download,So the players don't worry upgrade.
Open the package, two types of modelling is actually the same, looks like a tadpoles
Lateral upgrade button and USB Hub interface.
Open and see two different types of internal. Above is adopted in AVR chip, below is PIC chip.The p3hub 2 have done Bootloader flash files for users,as long as the dowoload official firmware,there is no much difference in the use.
Then we saw the actual performance. We will connect the PS3 usb hub, at the same time, in order to detect the USB plug in to work on, Continue to insert a PS EYE camera and a mobile hard disk.(mobile hard drive without additional take electricity).
Performance is really good, mobile hard disk drive is very good, no power supply shortfall. Let's choose PS Move masterpiece: "movement champions "to actual started game.
PS Eye cameras and hard disk work well, this USB on electronic dog with stable power supply and USB2.0 transmission rate. However,don't connect USB devices In the PS3 boot,ensure separate connection p3hub 2 started and enter debug mode can be inserted after other equipment.
P3HUB appear solved the PS3 host USB port enough problems, not only can be inserted disk, also can give handles charging. So the PS3 cracked one more users.
ps3 usb hub & p3hub 2 where to buy:
http://www.acceshop4u.com/ps2ps3-accessories-c-1829_1870.html
Official website release the new kernel (http://www.r4i-sdhc.com):
news:
R4i English V1.27b Date:[2010-10-14]
Download address: 【Italy】【Germany】【USA】
R4i Japanese V1.27b Date:[2010-10-14]
Download address: 【Italy】【Germany】【USA】
R4i French V1.27b Date:[2010-10-14]
Download address: 【Italy】【Germany】【USA】
R4i German V1.27b Date:[2010-10-14]
Download address: 【Italy】【Germany】【USA】
R4i Italian V1.27b Date:[2010-10-14]
Download address: 【Italy】【Germany】【USA】
R4i Spanish V1.27b Date:[2010-10-14]
Download address: 【Italy】【Germany】【USA】
R4i Dutch V1.27b Date:[2010-10-14]
Download address: 【Italy】【Germany】【USA】
R4i Korean V1.27b Date:[2010-10-14]
Download address: 【Italy】【Germany】【USA】
R4i Chinese Simplify V1.27b Date:[2010-10-14]
Download address: 【Italy】【Germany】【USA】
R4i Chinese Traditional V1.27b Date:[2010-10-14]
Download address: 【Italy】【Germany】【USA】
R4i Portugese V1.27b Date:[2010-10-14]
Download address: 【Italy】【Germany】【USA】
download address: http://www.r4i-sdhc.com/indexe.asp
R4i v1.27b Update:
1.Solved following issues of games:
5197 - One Piece: Gigant Battle! (J)
5215 - Pocket Monsters : White (J)
5216 - Pocket Monsters : Black (J)
5238 - Okamiden: Chisaki Taiyou (J)
5255 - Kingdom Hearts Re:coded (J)
note:
Products labeled “V1.4” do not support NDSI V1.4.1 hardware upgrade temporarily, please do not upgrade your NDSI to V1.4.1 version
where to buy r4i sdhc :
http://www.acceshop4u.com/r4r4ir4ds-series-c-2117_2118.html
The Third Generation began with release of the Supercard DSTWO. Emulation, drag/drop video playback, on-the-fly anti-piracy advancements, an in-game menu system, slow-motion, soft-reset, a real-time cheat editor, eReader support, and Hex editor. The biggest change in these flashcarts versus Second generation was the fact that these flashcarts had Anti-Piracy countermeasures to bypass the ROM without patching them and without requiring an firmware update... Also the fact that now these flashcarts have build in RAM and powerful CPUs which allow the use of powerful homebrew programs like Emulation, Video/Music playback and eReader support. Current the 3 flashcarts in existence that offer these features are The Supercard DSTWO, EX4i, iSmart Premium. Currently the DSTWO is the most popular flashcart in this Generation.
iSmart Premium is the 3rd most recent flashcart to enter the 3rd generation era. iSmart Premium is also a competitor to the Supercard DSTWO. Created by developed by iSmartDS Team. It's a DSi compatible Flashcart marketed around the $15 price range. The iSmartDS Team is made up of individuals who have publicly stated to have experience with the Flashcart hobby. Their firstcart, the iSmart Premium, is being heavily compared to both the Acekard series (price point and opensource firmware options) and EZ Vi (for which the iSmart Premium is based on), and features a yet unreleased opensource SDK, an in-game menu (save-states, in-game guide, soft-reset), customizable skins, multilingual support, an Action Replay cheat engine, hardware based Anti-Piracy circumvention, 3in1 expansion support, and more. The iSmartDS Team boasts that the Anti-Piracy patching routines are smart enough to circumvent all current and future ROM based anti-piracy measures. The kit also supports an intelligent save-type detection routine allowing the software to function without the need for save-type database file updates.
The SuperCard DSTWO was revealed on November 20, 2009,Currently The DSTWO is compatible on the DS, DSL, and DSi on the 1.4 Firmware. Nintendo has release 1.4.1 for NA,EU,JPN and 1.4.2 in China to block the current flashcarts. In less than 24hours after the release of the Nintendo DSi Update, Supercard Team release a bypass patch for the DSTWO to run on the latest DSi Firmware.it sale $38 usd ,also win a great deal of video gamers to choose it.
There are two files included in the archive. To apply the fix, you must have a DS Lite or a DSi with firmware version 1.3 or below or firmware 1.4 if you applied the 1.4 fix previously.
If you're using a DS Lite, run ak2ifw_update_141_DSi.nds and if you're using a DSi, run ak2ifw_update_141_DSi.nds, the ak2ifw_update_141_DSL.nds is used for when u wanna flash a bunch of Acekard2i's and the ak2ifw_update_141_DSL.nds has to be ran from a different flashcart and swapped out for the acekard2i's u want to update
update for 1.41 of DSi. Please refer to the readme file in the package.
download:http://www.acekard.com/download.php
A new system software for the Acekard2, Acekard2i cards has been released.
v1.7 Changelog:
• Updated Polish translation (Thanks Tatsuhikki).
• Updated Czech translation (Thanks penthaler).
• Added Norwegian translation (Thanks Glisern).
• Updated Italian translation (Thanks Miottolo).
• Updated Korean translation (Thanks cherries4u).
• Added Thai translation (Thanks kikukiku).
• Add option to disable homebrew softreset globally.
• Add homebrew softreset support for libnds 1.4.3 (IRQ hooking only)
• Updated savelist.bin
• Added Yellow Wood Goblin's updated GBA ROM patching routines.
• Fix GBA rom as shortcut detected as NDS rom bug.
• Yellow Loading is now default (A is Old DMA, X is QuickSave).
Popular tag: acekard 2i dsi ,acekard 2i,akaio 1.3
p3FREE can support the FAT PS3 and SLIM PS3, and all region.
The P3FREE boot step:
- 1. Remove the AC power cable from your SLIME PS3, or turn off the AC switch with your FAT PS3;
- 2. Insert the P3FREE, and remove other USB device if you inset it before, and eject the disk from BD drive if exist;
- 3. Insert the AC power cable to your SLIME PS3, or turn on the AC switch with your FAT PS3;
- 4. Touch the PS3 power button to active PS3, then touch the EJECT button quickly;
- 5. You will hear some "beep beep" sound from PS3, then the P3FREE RED LED will start to blinking, after a while, the RED LED will turn off and the GREEN LED will turn on.
when you see the GREEN LED turn on, it mean P3FREE have active already, now you can take off the P3FREE if you want.
Quality/Usability : With Sony going after PS Jailbreak, backordered Teensy's and ATMEL chips all thanks to PSGroove (open source) and clones flooding the scene. P3Free is one of those open source clones that is made by the team behind the solderless Wii-Clip for the Nintendo Wii. Upon receiving the package, the P3Free comes in a anti-static bag and 8-pin FPC cable. Unfortunately, P3Free Team rushed the P3Free just to make it for shipping and did not have a PIC Programmer completed. So those who received the first batch of P3Free (marked with [F]) can not upgrade until the PIC Programmer is completed (more info about situation and solution below). Luckily, the files are preinstalled with "PSGrooPIC1.4_wUSBHIDC18-BTL_LEDG-B4_MCLR_12MHz.hex" so no need to load them yourselves. When the PIC Programmer is finally available, you can update the P3Free with similar file,Simply plug-and-play and is compatible with Original PS3 and PS3 Slim.
Unlike some clones, P3Free logo is not printed on the casing but instead labeled with a sticker. Printed on one end of the casing is "FONT SIDE". When I first saw this, I thought typical Chinese misspelling when it was suppose to be spelled "FRONT SIDE". Eventually I found out that its to let you know how to insert the FPC . The FPC cable has writing on one side while the other side does not. So the side with writing will be facing up. On the end of the P3Free is a RED LED, GREEN LED, RESET button and slot to insert FPC cable. The case itself feels sturdy and looks well built. Since the files are already loaded, lets get to knowing how to use it. The process is the same as the PSGroove and requires 3.41 firmware. Anything above this will NOT work as Sony has blocked off this method. Anything under 3.41 will cause some problems.
The P3Free boot step:
- Remove the AC power cable from your SLIM PS3, or turn off the AC switch with your FAT PS3;
- Insert the P3Free, and remove other USB device if you inset it before, and eject the disk from BD drive if exist;
- Insert the AC power cable to your SLIM PS3, or turn on the AC switch with your FAT PS3;
- Touch the PS3 power button to active PS3, then touch the EJECT button quickly;
- You will hear some "beep beep" sound from PS3, then the P3Free RED LED will start to blink, after a while, the RED LED will turn off and the GREEN LED will turn on. When you see the GREEN LED turn on, it mean P3Free is successfully active, now you can take off the P3Free if you want.
Having successfully getting the P3Free to load on the first try, I thought I would try it out by installing some homebrew files such as FTP Server, Snes9x and Backup Manager. To instal these applications or any homebrew applications, you will need to download and save the .pkg files to a USB drive such as thumbdrive or harddrive. To install, simply insert USB drive to the PS3 and navigate to "INSTALL PACKAGE FILES" on the XMB under GAME. Select the file you want to install by pressing X and it will automatically install the file. All applications installed and loaded without any problems.
As we mentioned above that P3Free Team rushed P3Free just to make shipping so here is what they have to say about the situation...
NOTE FROM P3FREEP3Free Team are giving those from the first batch an option for those not comfortable with soldering a switch. They can ship a new P3Free kit that will be USB upgradeable or get one port PIC programmer. So don't worry, you're not stuck with an un-updatable device.
when the first batch goods ship out, the bootloader code is not ready yet, so we burn the stable v1.4 code in it, to make it can shipping at first time.
now we work with one new code that come with bootloader, and will teach user how to DIY the p3free to come with USB upgrade function.
in fact it's very simple, just SOLDER ONE SWITCH to p3free, and use any PIC programmer that come with ICSP port to burn the new code to p3free.
maybe is not easy for some new user, but anyway it's one solution still for who want to upgrade their p3free.
Conclusion : Overall, the P3Free USB Jailbreak PIC Programmer worked like it should by taking advantage of the PS3 USB exploit that allows you to install homebrew ,Unfortunately, those who purchased and received the first batch is left with a non-USB updatable P3Free. The only way to update is by using a PIC Programmer but even this is not available at time of this review. But the USB updatable version is available and will be shipping instead (label will be marked in blue color "F" and red color "1"). If you received the first batch, you can contact P3Free and they'll send you the new USB version as well as the PIC Programmer when its finally available.
AMAZEbreak, revolutionary, the inventory are being sold worldwide now! It is powerful to break through all PS3 barriers, perfectly supports 1、Upgradeable hardware firmware thoroughly! 2. Users can also upgrade the updated software through computer. 3、Reading speed will be 2 times faster and it makes users to play more smoothly. 4、 Back up Games and save to internal or external hard disk, in this way, the expensive blue-ray driver and disc can be abandoned. 5、Plug & play USB port, the installation will be finished in a few seconds. 6、Homebrew software is supported. 7、Simple and clear illustrations will guide you to install step by step. 8、AMAZEBREAK is compatible with all fat and slim model. 
AMAZEbreak’s powerful R&D team will provide users with excellent services for software upgrading and technical support.
PS3 AMAZE BREAK USB DONGLE brand new sealed in Carry Case
LATEST VERSION RELEASED 07OCT10
FULLY UPGRADEABLE via USB Port
WARRANTY
CALL 072 800 7499 FREE INSTALLATION/DELIVERY CERTAIN AREAS ONLYTechnical support.
Compatible with all production models FAT and SLIM. Supports all regions: USA, JAP, PAL and KOREA
Amaze break disables forced software updates and will never brick your console.
Supports all games
Backup games to your internal hard drive or external hard drive through USB, and boot directly off GUI. Eliminating the need for expensive blueray burners and costly blank media.
Play backups off your hard drives 2x as fast as off the blueray drive. This eliminates lags and glitches to provide you with smoother game play.
Open up your console to a new generation of homebrew applications. Load homebrew apps/games off any USB hard drive/flash drive.
Fully updatable with new features/updates by connecting Amaze break to any computers USB port.
The PS3 Break Modchip is currently the only Modchip on the market for the PS3 and it allows for instant gameplay of backed up games. Whether you choose to backup games onto your PS3 or onto an external hard drive, be sure they will work anytime and anywhere when using the one and only PS3 Break Modchip.
The PS3 Break Modchip is also the only Modchip that is fully USB and follows an easy to use, plug and play, installation process, do it yourself in a matter of minutes.
PS3 Break’s powerful R&D team will provide users with excellent services for software upgrading and technical support;
Features:
1. Upgradeable hardware firmware with V1.1 by USB interface thoroughly!
2. The key “Upgrade” is to enable access for version upgrades in case of blocking attempts by ps3 updates. Users can also upgrade the backup software through a computer.
3. Reading speed will be 2 times faster and it makes users to play more smoothly.
4. Games can be copied and saved to internal or external hard disk, Copied from Internal to External (Vice Versa) without Using a Retail Blue-Ray Disk in this way, the expensive blue-ray drive and Discs can be spared damage.
5. Plug & play USB port, the installation will be finished in a few seconds.
6. Homebrew software is supported.
7. Simple and clear illustrations (Video and PDF) will guide you to install step by step. (In Free Bundled DISK)
8. PS3 Break is compatible with all Fat and Slim models.
FREE Bundled DISK
The Free DISK is an All In One solution for new comers to the PS3BREAK scene. It contains all you need to get started with the PS3BREAK. Contents Include;
1. PS3BREAK User Instruction Manual
2. PS3BREAK HI-Definition Video Tutorial
3. Copying the PS3 Update On USB Drive Guide
4. PS3 System Software Update to V3.41
5. PS3break V1.1 Burner Guide (2010.09.27)
6. PS3break Burner Tool V1.1 (2010.09.27) [dotNetFx40_Full_x86_x64.exe, vcredist_x86.exe & PS3break_V1.1.exe]
7. PS3break Burner file V1.1b [HEX] (2010.09.24) [Support loading PS3 games without booting-disc]
8. Backup Manager 2.pkg (2010.09.24) [Support loading PS3 games without booting-disc]
9. OpenManager 1.0
● Supports up to 512 items from two USB devices, internal hdd and bluray
● Ability to copy games from bdvd to hdd0 or USB's, from hdd0 to USB's or from USB's to hdd0. It is done asking to you the destination device. It use uses asynchronous reading and writing for fast copy.
● Special support for big files in FAT: it splits files >= 4GB using .666xx fragments (if the file is name.ext, the file splits as name.ext.66600, name.ext.66601,...). This file is not bootable and it is marked using '_' as folder prefix. The file is joining when you copy it to hdd0 device
● Automatically finds the path of the games and asks to you about it. In other case, if the Open Manager is installed in the hdd0 creates one. You can change it pressing L2+START later.
● Including checking game option (pressing L1). It displays information about the files, size, splits or big files, if it have one.
● Support for Homebrew: you can creates "homebrew" folder in root USB FAT device and put here others folders with an EBOOT.BIN (.self format) and one ICON0.PNG. Also you can use the internal hdd0. Homebrew is launched directly and receive the path in argv[0].
● FTP support to upload homebrew: open_manager uses "OMAN46756" as user, by default.
Best place buy ps3 break v1.1
ps3 break view:Released by Acceshop4u team
